For EoIP three
important things: 1)Bridge, 2) Port, 3) Tunnel ID
The EoIP protocol encapsulates Ethernet frames in GRE (IP protocol number 47) packets (just like PPTP) and sends them to the remote side of the EoIP tunnel.
We can create point to point or point to multipoint EoIP tunnels.
Point-1 to Point-2 Tunnel and Vicer versa
Point-2 to Point-3 Tunnel and Vice Versa
Point-1 Mikrotik 10.1.1.1
Point-2 Mikrotik 11.1.1.1
Point-3 Mikrotik 12.1.1.1
Creating Tunnel and also Bridge for Point-1
Creating Tunnel and also Bridge for Point-2
This way we can create Point-3 (Tunnel and also Bridge)
Need to maintain Tunnel-ID same to two point-to-point links and different Tunnel names.
Also need to add Bridge if need to use multipoint LAN accesss.
(We can create point to point or point to multipoint EoIP tunnels. We need to change tunnel ID for separate multipoint tunnels)
........................................... Enjoy this............................... @tayabkhan@
www.tayabkhan.com
please upload pictures
ReplyDeleteCheck uploaded Pictures............
ReplyDeleteCheck uploaded Pictures router address
ReplyDeleteThanks for another excellent post. Where else could anybody get that type of info in such an ideal way of writing? In my opinion, my seeking has ended now. https://192-168-i-i.com/
ReplyDeleteThank you
DeleteIf it's not too much trouble see beneath for the most widely recognized highlights of wireless routers, and read on for definite clarifications of what those highlights are, and how they may profit you. best wifi router for long range
ReplyDeleteA decent switch bit, however, ought to be sharp, ought to hold its sharp edge, and ought to be even; this creates a piece that will last more and will "prattle" or vibrate less during use.asus router login
ReplyDelete