Tuesday, July 8, 2014

Juniper Router or Switches Alarm Signal

 Alarm Signal Problem  Remove for Juniper Device:

First check Alarm with bellow command::

root@Router> show system alarms  
1 alarms currently active
Alarm time               Class  Description
2014-06-17 08:15:17 BDT  Minor  Rescue configuration is not set

*** Here Shows Rescue Configuration is not set. A rescue configuration allows administrators to define a known working configuration that can be loaded (this is called a configuration roll-back) at any time.

Setting Rescue Configuration::

 root@Router> request system configuration rescue save

This will off the alarm signal .. You can check physically of via command either alarm off or not.

Check again:::
 root@Router> show system alarms                
No alarms currently active

============== Tayab Khan =============

No comments:

Post a Comment