PhyHome OLT ONU Laser Check and ONU Bandwidth Configuration

PhyHome-OLT ONU Laser check and Reboot::
---------------------------------------
* Login to NMS
Right Click to Device -> Configure -> Optical Detect Switch -> Select Desired SLOT, PON and ONU -> Refresh -> Enable/Disable -> Save
Right Click to Device -> State Callbacks-> Slot Optical Module -> Click desired SLOT/PON/ONU


PhyHome ONU MAC Authorization and save configuration::
--------------------------------------------------------------------------
* Login to NMS
Right click to Device -> Click Device Details ->
Choose desired Slot and PON -> click "Unauthorized ONU List" -> refresh -> Select ONU MAC ->
Click "Batch Authorize" -> Save

PhyHome ONU Bandwidth Configuration::
------------------------------------
First See ONU Selial Number : Click (DeviceTree) OLT (maximize Tree ) Click 01 for PON-1 and
Collect serial Number based on ONU Mac Address.
Right Click to Device -> Configure -> OoS Management -> ONU Bandwidth -> Click Required PON ->
-> Select ONU as Serial Number -> Click Upstream Bandwidth (10240 for 10Mb)
-> Click Downstram Bandwidth (20480 for 20Mb) -> Save