Juniper LACP and MikoTik Bonding

Juniper LACP (Aggregation / Ether Channel)
---------------------------------------------
** We want to use two port ge3 and ge3 for Juniper LACP

set chassis aggregated-devices ethernet device-count 3

set interfaces ge-0/0/3 ether-options 802.3ad ae1
set interfaces ge-0/0/4 ether-options 802.3ad ae1

set interfaces ae1 description AE-Interface-Tayab
set interfaces ae1 aggregated-ether-options lacp active periodic fast
set interfaces ae1 unit 0 family ethernet-switching interface-mode trunk
set interfaces ae1 unit 0 family ethernet-switching vlan members all


MikroTik Bonding
------------------------
Goto Interface and click Bonding

Goto Tab "Bonding" use Slave Ports and use mode 802.3ad