Pages

Saturday, October 29, 2016

FTTX solution GEPON OLT PhyHome Configuration


PhyHome OLT Configure
--------------------
default username and password: admin admin


# display running-configuration
# hostname New-OLT
** Goto System Mode
# system
** Goto System Configure Mode
system# configure
system\configure#

** Enable Uplink Ports**********
system\configure# uplink on 6:1
system\configure# uplink on 6:2
system\configure# uplink on 6:3
system\configure# uplink on 6:4
*** Set Uplink Mode to fiber or SFP/Optical etc...
**sgmii-coper port
**fiber-1G
**optical-10G
system\configure# uplink mode sgmii 6:1  //set uplink port-2 for SGMI/coper/Electrical SFP
system\configure# uplink mode fiber 6:2  //set uplink port-2 for fiber
system\configure# uplink mode sgmii 6:3 //Set uplink port-3 for coper
*** check uplink configuration: system# display uplink configuration all

*** Enable PON port*********
system\configure# pon on 1 1   //enable pon-1 for slot-1
system\configure# pon on 1 2   // slot-1 pon-2 enable
system\configure# pon on 1 3   // slot-1 pon3 enable
system\configure# pon on 1 4   // slot-1 pon4 enable

***** Configur VLAN and Tag to Uplink ***********

system\configure# exit
system# exit

// Configure maintenance VLAN and management IP // L2 VLAN Tag
system# exit
# maintenance
maintenance# config
maintenance\configure#
maintenance\configure# manage vlan 24 6:1 tagged
//management uplink port 6:1 set for vlan-id 24 and set management IP 192.168.10.2 with gateway 192168.10.1
maintenance\configure# manage ip 192.68.10.2/24
maintenance\configure# manage ip 192.68.10.2/24 192.168.10.1
#save
//Must need to create a VLAN at 192.168.10.1 device to untag this

##******* OLT Username Password Set /Reset / New User create *********
# maintenance
maintenance# configure
maintenance\configure# user add tayab tayab123
Successfully added user tayab as a NORMAL_USER ,
//To change user role use "user role" command .
maintenance\configure# user role admin tayab enablepassword
Successfully change user tayab to ADMIN mode.
maintenance\configure#
** Change Admin default password
maintenance\configure# user login-password admin
Input new login password for user admin please.
New Password:********
Confirm Password:********
Successfully changed password!.
maintenance\configure#


** Delete vlan if any error
maintenance\configure# manage vlan delete


*** SNMP and Time settings ********
# maintenance
maintenance# con
maintenance# configure
maintenance\configure# snmp community rw tayabrw
maintenance\configure# snmp community ro tayabro
maintenance\configure#

..........................
NMS Server login from NMS client:
user: root
Pass: root
ServerIP: 127.0.0.1 port 5188 fixed
....................................
'= Right click and Add device => Give IP -> Give snmp ro and Give snmp rw and connect



//L3 VLAN Tag// create a vlnan 22 name is OptimaxWAN and tagged/joined to the uplink port 6:1;
vlan# vlan-database data OptimaxWAN 22 6:1 tagged

*** IF we want Configure the ONT "auth" mode to "auto-auth" mode
// ONT will be register to the OLT automatically
system# ont
ont# configure
ont\configure#
ont\configure# auth-mode no-auth 1 //config the auth mode to no-auth mode for slot-1
ont\configure# auth-mode no-auth 2
ont\configure# auth-mode no-auth 3
ont\configure# auto-auth enable 1 // enable the ont auto-auth for slot-1
ont\configure# auto-auth enable 2
ont\configure# auto-auth enable 3
ont# display ont-auth-info slotno 1  // See ont-info

***/// Configure Internet services for the ONT

** Troubleshoot /ping
> ping 192.168.10.2
Reply from 192.168.10.2 : bytes=56: icmp_seq=0 ttl=64 time<10 ms
Reply from 192.168.10.2 : bytes=56: icmp_seq=1 ttl=64 time<10 ms

> display uplink configuration all
  port-idx port-state link-state auto-neg  speed duplex learning flow-control pvid prien privalue port-mode
  6:1      enabled    up         on        1000M full   enabled  Off          4088 off   0        sgmii
  6:2      disabled   down       on        1000M full   enabled  Off          4088 off   0        fiber
  6:3      enabled    down       on        1000M full   enabled  Off          4088 off   0        sgmii
  6:4      enabled    down       on        1000M full   enabled  Off          4088 off   0        sgmii
  6:5      enabled    down       on        1000M full   enabled  Off          4088 off   0        optical


=================










7 comments:

  1. How can i reboot ONU remotely in PHYHOME OLT.

    ReplyDelete
  2. how configure snmp

    ReplyDelete
    Replies
    1. snmp community ro phyhome
      snmp community rw phyhome
      snmp enable
      snmp trap enable
      snmp trap add 210.4.77.154 v2c community phyhome

      Delete
    2. but do not data in to server cacti....

      Delete
  3. but do not data in to server cacti....

    ReplyDelete